Reciprocating Dry
Vacuum Pump
Manufacturer in Vapi GIDC

Single Stage (730 mmHg) & Two Stage (750 mmHg). 1.5–10 HP. No water. No oil contamination. ISO 9001:2015 certified. Spare parts stocked locally. 24/7 service — Vapi, Silvassa, Daman & Surat.

ISO 9001:2015 Dry — No Water 24/7 Service 500+ Units/Year Since 2017

750

mmHg Max Vacuum (2-Stage)

1.5–10

HP Motor Range

24/7

Emergency Service

0

Water Consumption — Dry Design

7+

Years Since 2017
Product Overview

Reciprocating Dry Vacuum Pump — Built for Industrial Vacuum Applications

 Dry Design — No Water Required | No Oil in Air Stream | Zero Contamination Risk

RR Enterprise manufactures reciprocating dry vacuum pumps at our ISO 9001:2015 certified facility in GIDC Vapi, Gujarat. Available in two configurations — Single Stage achieving maximum vacuum of 730 mmHg (28.74 inch HG) and Two Stage delivering deeper vacuum up to 750 mmHg (29.52 inch HG) for demanding industrial applications.

The key differentiator: our reciprocating vacuum pump is a dry design — it requires no water and no oil enters the air stream. This makes it the correct choice for pharmaceutical, chemical and food processing applications where contamination from water or oil cannot be tolerated. Unlike water ring vacuum pumps, there is no water consumption, no water disposal cost and no risk of process contamination.

Both single and two stage models are available as bare pumps or with matched vacuum scrubber tanks. For applications requiring even deeper vacuum, our Vacuum Booster systems pair with these pumps to achieve vacuum levels of 755–758 mmHg.

Technical Challenges & Solutions

Common Problems — How Our Dry Vacuum Pump Solves Them

⚠ Challenge
Water ring pump contaminating process with water carryover
✓ Solution
Dry design — no water in the system. Zero contamination risk for pharma and chemical processes
⚠ Challenge
Single stage pump cannot achieve vacuum below 730 mmHg for distillation
✓ Solution
Two stage design achieves consistent 750 mmHg — suitable for vacuum distillation and solvent recovery
⚠ Challenge
High operating cost from continuous water consumption and disposal
✓ Solution
Dry pump eliminates water consumption entirely — significant reduction in operating cost per year
⚠ Challenge
Vacuum level dropping during batch process affecting product quality
✓ Solution
Positive displacement piston design maintains consistent vacuum level throughout the batch cycle
📄 Not sure — single stage or two stage for your application?

Share your required vacuum level, application and industry. Our engineers recommend the correct model and configuration for your process requirement. Free technical consultation for Vapi GIDC and South Gujarat factories.

Request a Free Site Survey →
Technical Specifications

Model Range & Specifications

Model Piston Disp. (CFM) Piston Disp. (CMH) Max Vacuum (Inch HG) Max Vacuum (mm HG) Motor (HP) Speed (RPM)
1235V 15.75 26.75 28.74 730 1.5 700
1235V 20.25 34.40 28.74 730 2 900
1244V 26.90 45.70 28.74 730 2 700
1244V 34.60 58.80 28.74 730 3 900
1255V 48.00 81.55 28.74 730 5 600
12600V 56.00 95.14 28.74 730 5 700
17V 77.00 130.80 28.74 730 7.5 700
17V 99.00 168.20 28.74 730 7.5 900
115V 116.00 197.08 28.74 730 10 700
115V 149.60 254.10 28.74 730 10 900
ⓘ Max Vacuum with Close Intake. All models: Dry design — no water required. Belt drive. Air cooled.
Model Piston Disp. (CFM) Piston Disp. (CMH) Max Vacuum (Inch HG) Max Vacuum (mm HG) Motor (HP) Speed (RPM)
1235VT 7.87 13.37 29.52 750 1.5 700
1235VT 10.80 18.34 29.52 750 2 900
1244VT 13.45 22.85 29.52 750 2 700
1244VT 17.30 29.39 29.52 750 3 900
1255VT 24.00 40.77 29.52 750 5 600
12600VT 28.00 47.57 29.52 750 5 700
17VT 38.50 65.41 29.52 750 7.5 700
17VT 49.00 83.25 29.52 750 7.5 900
115VT 77.00 130.82 29.52 750 10 700
115VT 99.00 168.20 29.52 750 10 900
ⓘ Two stage achieves higher vacuum (750 mmHg) vs single stage (730 mmHg). Suitable for distillation, solvent recovery and deep vacuum applications.
📄 Need Even Deeper Vacuum? — Vacuum Booster Systems

Pair our single or two stage pump with a Vacuum Booster to achieve 755–758 mmHg for high-vacuum pharmaceutical distillation and chemical processing applications.

View Vacuum Booster →
Key Features

Why Our Dry Vacuum Pumps Perform

Truly Dry — No Water Required
No cooling water, no seal water, no water disposal. Eliminates contamination risk and reduces operating costs significantly.
Single & Two Stage Available
Single stage for standard vacuum (730 mmHg). Two stage for deeper vacuum (750 mmHg). Right configuration for your process.
1.5–10 HP Motor Range
Right-sized for every application from small laboratory to large continuous industrial vacuum systems.
Positive Displacement Design
Consistent vacuum level throughout the process cycle. No performance degradation under load — critical for batch processes.
ISO 9001:2015 Certified
Every pump manufactured and tested to ISO quality standards at our GIDC Vapi facility. MSME registered.
Booster-Ready Design
Compatible with our Vacuum Booster for applications requiring 755–758 mmHg high vacuum.
Applications by Industry

Industries We Serve Across South Gujarat

Pharmaceutical
Vacuum filtration, distillation, freeze drying, solvent recovery, tablet coating, reactor evacuation.
Chemical Plants
Vacuum distillation, reactor evacuation, solvent recovery, degassing, vacuum crystallisation.
Food & Dairy
Vacuum packaging (MAP), vacuum cooling, milk processing, food preservation without contamination.
Plastics & Rubber
Thermoforming, vacuum forming, vacuum hold-down, degassing of rubber compounds.
Paper & Pulp
Sheet forming, dewatering, vacuum pickup on paper machines.
Agrochemical
Vacuum filtration, solvent recovery, reaction under vacuum for pesticide and fertiliser manufacturing.
📄 Get a Quote — Dry Vacuum Pump for Your Process

Share your required vacuum level, application, duty cycle and industry. We size the correct model and configuration. Free site visit for Vapi GIDC factories.

Why Choose Us

Why South Gujarat Factories Choose RR Enterprise

🏭
Local Manufacturer — GIDC Vapi
Manufactured at GIDC Vapi. Direct from manufacturer — no middleman. Factory visits and demos at our workshop.
24/7 Emergency Response
30–60 min response to Vapi GIDC. Any shift, any day. Vacuum pump failure in pharma means production stops — we respond fast.
📦
All Spare Parts Stocked Locally
Every wear part and seal stocked at our GIDC Vapi workshop. Same-day supply. No 2-week wait from distant suppliers.
ISO 9001:2015 Certified
Every pump manufactured and tested to ISO quality standards. Critical for pharmaceutical and regulated industry compliance.
📚
AMC Programme Available
Annual Maintenance Contract with scheduled visits, piston ring and valve replacements, and priority emergency response.
🔌
Booster System Manufacturer
We manufacture both the vacuum pump and the vacuum booster — complete high vacuum system from one supplier.
📦

Spare Parts Stocked at GIDC Vapi Workshop

Compression Parts
Piston Assembly · Piston Ring Set · Cylinder · Air Head · Spacer Plate · Gasket Set
Valve Assembly
Finger Valve · Disc Valve · NRV · Safety Valve
Drive Assembly
Crankshaft · Crank Pin Bush · Connecting Rod · Crankcase Body · Pulleys · Belt Guard
Filtration
Inlet Air Filter Element
Vacuum Accessories
Vacuum Scrubber Tank · Vacuum Gauge · Vacuum Relief Valve
Booster Parts
Available for Vacuum Booster systems — see Vacuum Booster page
FAQs

Frequently Asked Questions — Air Compressor for Agrochemical Industry in Vapi

Questions from plant managers, maintenance engineers and ETP supervisors at agrochemical plants in Vapi GIDC and Silvassa.

A reciprocating dry vacuum pump uses pistons to evacuate air from a system without requiring water or oil in the air stream. It is called dry because the pumped gas does not contact any liquid. This eliminates contamination risk — critical for pharmaceutical, chemical and food applications. Unlike water ring pumps, no water supply is needed and there is no water disposal cost.
Single stage achieves maximum vacuum of 730 mmHg (28.74 inch HG). Two stage achieves deeper vacuum up to 750 mmHg (29.52 inch HG) by evacuating in two stages. For pharmaceutical distillation, solvent recovery and other deep vacuum applications, two stage is the correct choice. For standard vacuum packaging, vacuum forming and general industrial vacuum, single stage is sufficient.
Yes, in most industrial applications. The dry reciprocating pump eliminates water consumption entirely, removes contamination risk and significantly reduces operating costs. Vacuum levels achieved (730–750 mmHg) are comparable to water ring pumps used in similar applications. Our engineers assess your existing system and confirm compatibility before supply.
Yes. All spare parts are permanently stocked at our GIDC Vapi workshop — piston assemblies, ring sets, finger valves, disc valves, gasket sets and all drive components. Same-day supply for Vapi, Silvassa and Daman. No waiting for parts from distant distributors.
Yes. Our Vacuum Booster system paired with a two stage pump achieves 755–758 mmHg — suitable for high-vacuum pharmaceutical distillation and deep vacuum chemical processing. The booster is available as a matched unit with the pump or as an addition to an existing pump. See our Vacuum Booster page for specifications.
mission
01

Mission

We have a corporate philosophy of delivering high-quality products by implementing the latest technology resulting in unmatched quality standards at competitive prices. The company today is a leading name in the category of rotary screw air compressor, vacuum pump, twin lobe roots blower and vacuum booster particularly.

vision
02

Vision

We are an Indian manufacturing company that has been producing compressors since 2017. Over the years, At the center of our company is a commitment to putting the customers needs first.

our-success
03

Our Success

We have achieved success today by implementing the latest technology in our design and production. We have left no leaf unturned in offering high-quality, durable and cost-effective products over the years and won the trust and satisfaction from all our clients spread nationally and across the globe.

Our Clients

Trusted by Gujarat’s Leading Industries

Sun Pharma, Emami, Sumul, Supreme Group, Megafine, Faze Three and more.

Request a Quote — AIRnet Compressed Air Piping

Aluminium · Stainless Steel · Polyamide — D20 to D158 · 10-year warranty Authorised Chicago Pneumatic AIRnet installer · Free site survey across South Gujarat

×

Get a Free Quote